Description
General Features
Nominal power (VA) 2000
Active power (W) 1800
Technology On-Line Double Conversion VFI-SS-111
Waveform Sinusoidal
UPS architecture convertible tower and rack 19
Input voltage 230 V
Input frequency 50-60 Hz ±5% Autosensing
Input Voltage Range 160V – 288V on full load
THD Input current < 3%
Input power factor > 0.99
Input Plug 3 101 70: Multi Standard
3 100 49: British Standard
Output voltage 230V ± 1%
Output frequency (nominal) 50/60 Hz (can be set from the LCD panel) +/- 0.1%
Crest Factor 1:3
THD Output voltage < 3%
Output Voltage Tolerance ±1%
Bypass Internal automatic
Bypass (included) External maintenance Bypass (OPTIONAL)
Batteries
Uptime Expansion yes
Number of batteries 6
Battery series Type/Voltage 12V 7.2Ah
Uptime with 80% load (min) 10
Recharge time (to 100%) 4 hours
Battery disconnector for safe transportation yes
Communication and management
Display and Signals Four buttons and four LEDs to monitor the status of the UPS in real time
Communication Ports RS232 serial ports, USB
Remote Management available
Network interface slot SNMP
Mechanical features
Measurements H x L x D (mm) 440×88 (2U) x600 Battery Cabinet Measurements H x L x D (mm) 440×88 (2U) x600
Net Weight (kg) 29.5
Environmental conditions
Operating temperature (°C) 0 ÷ 40 °C
Degree of protection IP20
Relative humidity (%) 0-95% non-condensing
Noise level at 1 m (dBA) On-Line Mode < 50 Eco Mode < 40
Heat Loss (BTU/h) 645
Certifications
Standards
EN 62040-1, EN 62040-2, EN 62040-3